Καρφίτσες και μανίκια συστημάτων εκτίναξης
(25)
Κωνική επικεφαλής φόρμα καρφιτσών μανικιών μανικιών DIN 1530 συστημάτων εκτίναξης φορμών εναζώτωσης
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:Nitriding Mold Ejector Sleeves, FIBRO Mold Ejector Sleeves, EDM Sleeve Pin Mold
Conical Head Mold Ejector Sleeves DIN 1530 D Through Hardened PRODUCT DESCRIPTION Ejector sleeves are typically installed into the mold using a variety of methods, including press-fit, threaded, or tapered fit. The specific installation method used will depend on the size and shape of the ejector sl... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
Οι κωνικά επικεφαλής καρφίτσες και τα μανίκια συστημάτων εκτίναξης λεπταίνουν τον τοίχο
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:Conical Head Ejector Pins And Sleeves, Conical Head Ejector Pins And Sleeves, thin wall ejector sleeves
Conical Head Mold Ejector Sleeves DIN 1530 D Through Hardened PRODUCT DESCRIPTION Ejector sleeves can be used in both single-cavity and multicavity molds. In multicavity molds, multiple ejector sleeves are typically used to eject each part from the mold cavity. Our Main Products Plastic injection mo... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
Καρφίτσες και μανίκια Δ συστημάτων εκτίναξης DIN 1530 EDM μέσω
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:HASCO Ejector Pins And Sleeves, EDM Ejector Pins And Sleeves, dme ejector sleeves
Conical Head Mold Ejector Sleeves DIN 1530 D Through Hardened PRODUCT DESCRIPTION Ejector sleeves can be customized to meet the specific needs of an injection molding application. This can include features such as specialized coatings to improve wear resistance, or special geometry to accommodate un... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
Κωνική επικεφαλής φόρμα καρφιτσών μανικιών καρφιτσών συστημάτων εκτίναξης και μανικιών DIN 1530
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:Conical Head Ejector Pins And Sleeves, Hardened Ejector Pins And Sleeves, DIN 1530 Sleeve Pin
Conical Head Mold Ejector Sleeves DIN 1530 D Through Hardened PRODUCT DESCRIPTION Ejector sleeves are available in a variety of sizes and shapes, depending on the specific requirements of the injection molding application. They can be straight or angled, and can have a range of diameters and lengths... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
Κωνικά επικεφαλής μανίκια DIN 1530 Δ συστημάτων εκτίναξης φορμών μέσω
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:Conical Head Mold Ejector Sleeves, DIN 1530 Mold Ejector Sleeves, HSS sleeve ejector pin
Conical Head Mold Ejector Sleeves DIN 1530 D Through Hardened PRODUCT DESCRIPTION Ejector sleeves are an essential component of injection molding machines, used to eject the molded product from the mold cavity. They are typically made of high-strength materials such as hardened steel or tungsten car... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
Ευθεία καρφίτσα συστημάτων εκτίναξης επεξεργασίας HASCO DME MISUMI JIS κασσίτερου τμημάτων σχηματοποίησης εγχύσεων FDAC
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:FDAC Injection Molding Components, TiN FDAC Injection Molding Components, HASCO FDAC Injection Molding Components
PRODUCT DESCRIPTION Mold Parts Mold Components HASCO DME MISUMI JIS Straight Ejector Pin Ejector Sleeve Standard:PUNCH/MISUMI/Customized Material: FDAC,SKD61,SKH51 etc. Treatment: Vacuum Nitriding, Chemical black, TiCN, DLC.TiN, TiCN,Nitriding, Product Name Ejector pin/Straight/Shoulder/Core pins/Ej... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
DIN1530AH Mold Guide Pins SUJ2 H13 1.2607 Injection Moulding Ejector Pins Through Hardened
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:DIN1530AH Mold Guide Pins, Mold Guide Pins SUJ2, 1.2607 Injection Moulding Ejector Pins
PRODUCT DESCRIPTION DIN1530AH through hardened SUJ2 H13 1.2607 Ejector Pin mold parts Standard: DIN16756, MISUMI, ASTM, JIS, customized Material: 1.2067, H13, SKH51, SKD11, 65mn etc. Hardness: Head = HRC45+/-5, Shaft = HRC60+/-2 Through Hardened Material SKD61 SKH51 65MN SUJ2 Standard Ref DIN1530 HA... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
DIN16756 Thin Wall Ejector Sleeves Injection Moulding 1.2067 ASTM SKH51
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:DIN16756 Thin Wall Ejector Sleeves, Thin Wall Ejector Sleeves 1.2067, Sleeve Ejector Injection Moulding ASTM
PRODUCT DESCRIPTION Ejector sleeves DIN16756 Sleeves plastic injection mold component Standard: DIN16756, MISUMI, ASTM, JIS, customized Material:SKD61/SKH51/SKD11,1.2344, 1.2067 FDAC Treatment: Nitriding,TiN,TiCN, etc ORDER FLOW CHAT: Customer inquiries → Provide Spec./CAD/3D drawing → Engineer chec... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
1.2842 Industrial Pins And Punches1.2210 Blade Ejector For Plastic Injection Mold
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:1.2842 Industrial Pins And Punches, Industrial Pins And Punches 1.2210
PRODUCT DESCRIPTION Flat Ejector Pin, Blade Ejector Blades for Plastic Injection Mold DIIN1530FH, DIIN1530F DIN1530F-B Standard: DIIN1530, JIS, DIN, HASCO,MISUMI, PUNCH, AMERICAN INCH Material:H13 /M2/SKD61/SKH51/SKD11/ 1.2344/ 1.2210Through Hardened, Nitriding, Head Tempered, Blackened, Treatment:T... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
Conical Head Mold Ejector Pins And Sleeves DIN 1530 D Through Hardened
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:Ejector Pins And Sleeves DIN 1530 D, Conical Head Ejector Pins And Sleeves, Mold Ejector Pins
PRODUCT DESCRIPTION Product's name: Precision DIN1530D ejector pin with conical head of mold parts for plastic injection Treatment:Heat treatment Core hardness:HRC58-62 Surface treatment: NItrided HV 900-1100 Raw Material:SKD61,SKH51,HSS, VANADIS, 1.2344, H13, etc. only high quality materials is use... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
Customised HRC 58 Ejector Pins Injection Molding M2 1.2344 Insert Pin
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:HRC 58 Ejector Pins Injection Molding, Ejector Pins Injection Molding M2, 1.2344 Insert Pin
PRODUCT DESCRIPTION Customised Ejector pin, Insert pin, Core Pin, Shoulder Pin Mold ejection system mold ejector pin Standard: Non standard/ Customised/DIN/JIS/ ISO6751 DIN, JIS, MISUMI, PUNCH/ RABOUDINAmerican Inch, Material: WS 1.2210/WAS 1.2344 /H-13 /M2/SKH51/SKD11/ SKS3/ EN31 Treatment: TTiCN, ... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
DIN16756 Stainless Steel Ejector Pins 1.2344 Tubulaire Nitride Ejector Sleeves
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:DIN16756 Stainless Steel Ejector Pins, Stainless Steel Ejector Pins 1.2344
PRODUCT DESCRIPTION DIN16756 sleeves Ejector Pin Molds Ejectors tubulaire Nitride Ejector sleeves Standard: DIN16756, customized Material: FDAC, 1.2344, SKD61 Surface Treatment: TiCN, TiN, Aitain, Ticrn, nitriding , Black oxygened, Black coating etc available. Our Main Products Plastic injection mol... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
SKH40 SKH51 Injection Mold Ejector Pin TiCN Core Pins And Sleeves
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:SKH40 Injection Mold Ejector Pin, SKH51 Injection Mold Ejector Pin, TiCN Core Pins And Sleeves
PRODUCT DESCRIPTION Plastic Injection Mold Ejector Pin and Ejector Sleeve Standard:Standard and non standard Material: SKD61,SKH51 ,SKD11 ,SKH40, FDAC Treatment: TiN, TiCN,Nitriding, PVD coating Product Name Plastic Injection Mold Ejector Pin and Ejector Sleeve Materials FDAC,SKD61,SKH51 Certificati... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
GB EN Ejector Pin Molding DME MISUMI HASCO Standard Straight Hardened Sleeves
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:GB Ejector Pin Molding, EN Ejector Pin Molding, HASCO Hardened Sleeves
PRODUCT DESCRIPTION DME MISUMI Standard Straight Ejector Pin, ejector sleeve shoulder sleeves for mold parts Standard:DIN1530 HASCO MISUMI and customized Material: SKD61, SKH51,Tool steel, H13,L2,SKS21, High Speed Steel. Treatment: Nitriding, PVD coating, polish etc.TiN, TiCN, Oxide The design of th... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
DIN1530C DIN1530CH Square Ejector Pins Mold , Shoulder DME Die Ejector Pins
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:DIN1530C Square Ejector Pins, DIN1530CH Square Ejector Pins, DME Die Ejector Pins
PRODUCT DESCRIPTION DIN1530C DIIN1530CH Plastic Injection Mold Shoulder Ejector Pin Die Mold Standard: DME, HASCO,MISUMI, PUNCH, Customised Material: SKD61/SKH51/SKD11/ 1.2344, 65mn etc. Treatment: Nitriding, chemichal blacking, TiN, TiCN ALCRN PVD DLC Product Name DIN1530C DIIN1530CH Plastic Inject... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
Flat Blade Ejector Pin DIN1530FH DIN1530F DIN1530F-B Injection Molding Pins
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:Blade Ejector Pin DIN1530FH, Blade Ejector Pin DIN1530F, DIN1530F-B Injection Molding Pins
PRODUCT DESCRIPTION Flat Ejector Pin Ejector Blades For Plastic Mold Components DIIN1530FH, DIIN1530F DIN1530F-B Standard: DIIN1530F, DIIN1530FH, DIN1530F-B, HASCO,MISUMI, PUNCH, AMERICAN INCH Material:H13 (Hardened) /M2/SKD61/SKH51/SKD11/ 1.2344, High Speed Steel etc. Treatment:Through Hardened, Ti... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
WS 1.2210 Ejector Pins And Sleeves DIN1530A-B , TiCN Custom Core Pins
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:Ejector Pins And Sleeves WS 1.2210, Ejector Pins And Sleeves DIN1530A-B, TiCN Custom Core Pins
PRODUCT DESCRIPTION Customised insert pin Core Pin Ejector Pin Straight head ejector pin Mold ejection mold ejector pin Standard: DIN,JIS, MISUMI, American Inch, customized, non standard Material: SKD11/SKD61/SKD51//ASP23/Vanadis/CPMRTXM4/HSS/A2,M2/D2/SUJ2/S45C Treatment: TiCN, TiN, Aitain, Ticrn, n... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
ISO8694 Straight Ejector Pins And Sleeves DIN1530-C DIN1530-CH
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:Ejector Pins And Sleeves DIN1530-C, ISO8694 Ejector Pins And Sleeves, Straight Ejector Pins
PRODUCT DESCRIPTION Product Name DIN1530C DIIN1530CH Plastic Injection Mold Shoulder Ejector Pin Die Mold Product Specification DIN1530CH WS 1.2210 HRC 58-62 DIN 1530C WAS 1.2344 >=HV 950 HRC 40-45 DIN 1530C-B WAS 1.2344 >=HV 950 HRC 40-45 Surface treatment Vacum Nitride, Polishing Heat treatm... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
SKD61 ASP23 Ejector Pins And Sleeves JIS Standard H13 Shouldered Metric Ejector Sleeves
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 5 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:SKD61 Ejector Pins And Sleeves, ASP23 Ejector Pins And Sleeves, Metric Ejector Sleeves
PRODUCT DESCRIPTION Shouldered Ejector Sleeves JIS Standard H13 American Inch Stepped Ejector Sleeves MISUMI Standard: JIS/DIN16756 / ISO8405 DME/MISUMI/HASCO/ American Inch Material: H-13/ M2 SKD61/SKH51/SKS3/ 1.2067 Hardened Steel/ 1.2344 Treatment: Bright Nitrided, TiN, TiCN PVD DLC, Black KH51 t... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος
DIN 1530A B Black Mould Ejector Pins And Sleeves DIN 1530 AH DIN 1530 A
Τιμή: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Ωρα παράδοσης: 5-8 days
Μάρκα: DATONG
Υψηλό Φως:Ejector Pins And Sleeves DIN 1530 AH, Ejector Pins And Sleeves DIN 1530 A, Black Mould Ejector Pins
PRODUCT DESCRIPTION Product Name DIN1530AH/ DIN1530A/ DIN1530A-B Black Straight head ejector pin Product Specification DIN1530AH WS 1.2210 HRC58-62 DIN 1530A WAS 1.2344 Surface hardness>=HV 950 Core HRC 40-45 DIN 1530A-B WAS 1.2344 Surface hardness >=HV 950 HRC 40-45, Black Surface treatment V... Δείτε περισσότερα
➤ Επίσκεψη Δικτυακός τόπος